WEBVTT Wheel change Step-by-step guide - Whether it's because of a flat tyre or a change in season, we'll show you how it's done. - Status 04/2023 - The information in this video is not a substitute for the owner's manual for your specific vehicle. Please observe the vehicle owner's manual. - The explanations apply to vehicles with combustion engines. - You can perform a wheel change on your Volkswagen by yourself. - When doing so, it's important to use a jack that is appropriate for the weight of the vehicle. - To change a wheel, you need: - Jack - Rim lock wrench - Wheel wrench - Extractor for plastic caps* - *With aluminium rims only - Optional: - Tyre chalk - Tread depth measurement tool - Torque wrench* - Spider wrench - *The torque wrench must be suitable for up to 180 Nm for a Volkswagen - depending on car model, rim size, rim type and number of screws. Detailed information can be found in the owner's manual. - Our Volkswagen Emergency Wheel Set* contains all the tools you need to change a wheel. - It is available to purchase from your Volkswagen Retailer - *The emergency wheel is intended for use in the event of a breakdown. - With the emergency wheel, you can drive at a maximum speed of 80 km/h (50 mph). - Wheel change checklist once you've parked your vehicle on an even surface: - Apply the handbrake, put the vehicle into 1st gear ("P" in automatic vehicles). - Loosen wheel nuts or bolts using the spider wrench or wheel wrench by approximately a 1/4 turn. - Position the jack directly at the attachment point on the underbody and raise it to the assembly height. - If the jack is not positioned under the attachment point, it may result in damage to the sill. - Unscrew the wheel nuts with the spider wrench or wheel wrench. - Remove the Wheel - Check the wheel contact surface. - Remove any rust and check brake discs and pads for wear.* - *If in doubt please contact your Volkswagen Retailer. - Place the new wheel in the correct running direction and hand-tighten all wheel nuts using the spider wrench or wheel wrench. - Lower the car with the car jack. - Tighten the wheel nuts with the prescribed torque. - Finally, measure the tyre pressure. - Please observe the recommendations in the owner's manual or on the sticker on the inside of the fuel flap or the inside of the driver's door. - Important for demounted tyres: - Inspect for damage (e.g. tears or nails in the tyre) - Check the age of the tyre on the sidewall (DOT number) - If the tyre is more than 10 years old, we recommend disposing of it, regardless of condition. - The four-figure DOT number indicates the time of production (calendar week + year). - Tyre manufacturers may recommend a different service life depending on vehicle use. - Measure tread depth - If any of the three are found to be deficient, you must dispose of the tyres properly. - Intact tyres should be stored. - Note the respective position on the vehicle on each tyre. (e.g. using tyre chalk) - Would you rather not perform the wheel change yourself or do you need new tyres! - Your Volkswagen Retailer will be happy to help - We wish you a pleasant journey!